User Manual

Kit Assembly 99-2010
7
Double DIN Radio provision
(Figure A)
(Figure B)
(Figure C)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2 Snap the radio housing brackets to the
inside edge of the double DIN trim plate.
(Figure A)
3. Slide the double DIN head unit or
stacked ISO head units into the bracket/
radio housing assembly and secure the
double DIN head unit or stacked ISO
head units to the assembly using the
screws supplied with the radio.
(Figure B)
4. Snap the radio housing trim plate onto
the front of the radio housing.
(Figure C)
5. Reassemble dash in reverse order
of disassembly.