User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-2010 Single or Double DIN Installation Dash Kit for 2005-2009 Cadillac STS

1

2

3

4

5

6

7

5

Kit Assembly 99-2010

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Flip the radio housing brackets upside

down then snap them to the inside edge

of the radio housing. (Figure A)

3. Slide the pocket into the top of the

opening aligning the holes in the radio

housing brackets with the bosses on the

pocket and secure using the provided

(4) #8 x 3/8” screws. (Figure B)

4. Slide the ISO radio into the opening

below the pocket and secure the unit to

the kit using the screws supplied with

the radio. (Figure C)

Continue to next page.

ISO mount radio provision with pocket

(Figure A)

(Figure B)

(Figure C)