Specifications

99-2007 KIT ASSEMBLY
3
B
C
D
ISO MOUNT RADIO PROVISION WITH POCKET
2
Slide the pocket into the top of the
opening aligning the holes in the
radio housing brackets with the
bosses on the pocket and secure
using the provided (4) #8 3/8”
screws.
(Figure B)
3
Slide the ISO radio into the opening
below the pocket and secure the unit
to the kit using the screws supplied
with the radio.
(Figure C)
4
Snap the radio housing trim plate
onto the front of the radio housing.
(Figure D)
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Flip the radio housing brackets upside
down then snap them to the inside
edge of the radio housing.
(Figure A)
1
A