Installation Guide

5
REV. 3/14/2019 INST95-9701
KIT ASSEMBLY
1. Secure the radio brackets to the radio
housing with (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Slide the radio into the radio housing
assembly and secure with screws
supplied with the radio. (Figure B)
3. Secure the radio housing assembly to the
bike using (4) 3/16 Allen screws previously
removed in step 8 of disassembly. (Figure C)
4. a. For the Street Glide, Electra Glide,
Ultra, and Limited models 2014-up:
Attach the radio bracket removed in
step 6 of disassembly to the top of the
radio housing assembly, and secure
with (4) Phillips screws supplied.
b. For the Road Glide 2015-up:
Attach the fairing bracket removed in
step 10 of disassembly to the top of the
radio housing assembly, and secure
with (2) Phillips screws supplied.
Ensure the bracket is far forward, and
the curved portion is facing the rear of
the bike as mentioned in disassembly .
5. Reassemble the fairing in reverse order
of disassembly.
(Figure A)
(Figure B)
(Figure C)