Installation Guide

ManualsBrandsMetra ManualsCar Electronics & GPSMetra - Dash Kit for Select Harley-Davidson Motorcycles - Black

1

2

3

4

5

6

7

8

9

3

REV. 3/14/2019 INST95-9701

FAIRING DISASSEMBLY (CONT)

5. Remove (11) screws securing the radio

bracket: (Figure E)

a. (2) T-27 Torx screws shared with the

gauge cluster and a third T-27 Torx

screw to remove the gauge cluster in

step 7.

b.

(4) 5/32” Allen screws facing outward.

c. (4) T-25 Torx screws secured to the

radio.

d. (1) T-25 Torx screw shared with the

storage pocket.

6. Remove the radio bracket. (Figure E)

Note: This bracket will be reused in

re-assembly

.

7. Remove the gauge cluster. (Figure E)

8. Remove (4) 3/16 Allen screws from the

sides of radio. (Figure F)

Note: These screws will be reused in

Kit Assembly.

9.

Slide the radio out toward the rear of the

bike, and unplug the radio. (Figure F)

(Figure E)

(Figure F)