Instructions/Assembly Guide

ManualsBrandsMetra ManualsCar Electronics & GPSDash Kit for Select Land Rover Vehicles - Black

1

2

3

REV. 2/11/2021 INST95-9406B

3

KIT ASSEMBLY

(Figure A) (Figure B)

ISO DDIN radio provision

1. Attach the radio brackets to the radio

trim panel using (4) #8 x 3/8” Phillips

screws supplied. (Figure A)

2. Slide the radio into the completed

assembly, and then secure it to the

assembly using screws supplied with

the radio. (Figure B)

3. Locate the factory wiring harness and

antenna connector in the dash, and

complete all necessary connections to

the radio. Metra recommends using

the proper mating adapter from Metra

and/or AXXESS. Test the radio for proper

operation.

4. Reassemble the dash in reverse order of

disassembly.