Quick Start Guide

REV. 1/8/2018 INST95-9404B
3
KIT ASSEMBLY
(Figure A) (Figure B)
ISO DDIN radio provision
1. Slide the ISO DDIN sleeve into the radio
housing , then secure by bending the
metal locking tabs outward (Figure A)
2. Slide the ISO DDIN sleeve/radio housing
assembly into the radio cavity in the sub
dash. (Figure A)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess. Test the radio for
proper operation.
4. Slide the radio/bracket assembly into
the sleeve until it clicks in. (Figure B)
5. Reassemble the dash in reverse order of
disassembly.
6. Snap the radio trim ring onto the radio
trim panel to complete the installation.