Quick Start Guide

1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the dash panel
surrounding the radio.
2. Remove (4) screws securing the radio.
3. Pull up on the shifter knob to remove it.
4. Unclip, unplug and remove the center
console panel.
5. Remove the (2) screws securing the
climate control panel.
6. Unclip and remove the A/C vent panel.
7. Pull the radio and the climate controls
out slighly. The climate control does not
need to be completely removed.
8. Unclip and remove the radio.
Continue to Kit Preparation
DASH DISASSEMBLY KIT PREPARATION
Please visit Metraonline.com for
Dash Disassembly illustrations.
(Figure B)
(Figure A)
1. Assemble the spacers to
the ISO DDIN brackets . It
is recommended to use the
positions indicated. Other
positions are also possible.
(Figure A)
2. Attach the ISO DDIN bracket
assembly to the radio using
the (4) Phillips screws
provided. (Figure B)
Continue to Kit Assembly
Use this position for mounting the
bracket assembly to the radio.
Use position 16 and 18 to index
the spacer in the radio bracket.
Measured from left to right.