User Manual

1.800.221.0932
|
MetraOnline.com
8
With the key in the off position:
1. Connect the 9324 harness to the 9324 interface, and then to the wiring harness in the
vehicle.
2. Connect the ASWC-1 harness to the ASWC-1 interface, and then to the 9324 interface.
3. Locate the factory antenna connector in the dash and complete all necessary connections to
the radio. Use the antenna adapter provided to adapt the factory antenna connector to the
aftermarket radio.
Attention! If retaining steering wheel controls, ensure that the SWC jack/wire is connected to the
radio before proceeding. If this step is skipped, the interface will need to be reset for the steering
wheel controls to function.
I N STA L LATI ON