User Manual

1.800.221.0932
|
MetraOnline.com
4
Climate Control Relocation
1. Remove (7) screws securing the climate
controls to the radio/climate control
panel, then remove the climate controls.
(Figure A)
2. Attach the climate controls to the
climate control trim panel, then secure
using the factory screws. (Figure B)
3. Secure the climate control assembly to
the climate control housing using (3)
Phillips screws provided. (Figure C)
4. Connect the climate control assembly to
the climate control extension harness
in the dash, then secure the assembly
to the dash using the screws removed in
step 3 from Dash Disassembly.
Sub-Dash Modification
4. Cut the shaded area in the sub-dash to
allow room for the aftermarket radio.
The sub-dash panel may come out to
perform this task. There are (3) nuts
securing the sub-dash panel. Note that
the top screw will have to be removed
and left out. (Figures D, E & F)
Continue to Kit Assembly
KIT PREPARATION
(Figure A)
(Figure D)
(Figure B)
(Figure C)
(Figure E)
(Figure F)