User Manual

1.800.221.0932
|
MetraOnline.com
2
1. Unclip, unplug, and remove the hazard/
door-lock switch. (Figure A)
2. Unclip the a/c vent panel and slightly
pull it out just enough to disconnect the
temperature control cable, then remove
the panel. (Figure B)
3. Remove (2) screws securing the storage
pocket on the top of the dash, then
unclip and remove the pocket. (Figure B)
Continued on the next page
DASH DISASSEMBLY
(Figure A) (Figure B)