User Manual

REV. 1/22/2019 INST95-9318B
5
AXXESS INTERFACE INSTALLATION
• Provides accessory power
• Retains audio/phone† controls on the steering wheel
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains warning chimes through an outboard speaker
• Comes with all necessary wiring to relocate the factory radio to retain vehicle settings
• Retains the factory amplifier
• Retains balance
• Micro-B USB updatable
INTERFACE FEATURES
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
TOOLS REQUIRED
• 9318 interface
• 9318 harness
• ASWC-1 interface
• ASWC-1 harness
• Amplifier interface
• Chime speaker
• Female 3.5mm connector with stripped leads
• HSD+2 extension cable
• 4-pin data extension cable
Connections ..............................................................................................................................................6
Installation ............................................................................................................................................... 7
Programming ...........................................................................................................................................8
Harness Layout .........................................................................................................................................9
INTERFACE COMPONENTS
TABLE OF CONTENTS
† Radio dependent