User Manual

REV. 1/22/2019 INST95-9318B
3
Climate Control Assembly
1. Unplug the connector to the radio
controls, then unclip and remove the
climate controls from the radio/climate
control panel. (Figure A)
2. Clip the climate controls into the radio
trim panel. Ensure that the middle clip is
lined up perfectly. (Figure B)
3. Attach the (2) panel clips provided onto
the radio trim panel.
Sub-dash Modification
4. Cut the sub-dash to allow room for the
aftermarket radio. (Figure C)
Continue to Kit Assembly
KIT PREPARATION
(Figure B)
(Figure A) (Figure C)