User Manual

ManualsBrandsMetra ManualsCar Electronics & GPSDash Kit for Subaru Impreza 2017 and Up Vehicles - Black

1

2

3

REV. 7/12/2017 INST95-8908HG

3

ISO DDIN radio provision

1. Attach the

radio brackets

to the radio

using the screws supplied with the

radio. (Figure A)

2. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using the

proper mating adapter from Metra.

Test the radio for proper operation.

3. Secure the completed assembly into the

sub-dash using the factory screws.

4. Snap the

radio housing trim panel

over

the completed assembly, and then

reassemble the dash in reverse order

of disassembly.

KIT ASSEMBLY

(Figure A)