User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-8901 Double DIN Dash Kit for Subaru Legacy and Outback 2005-2009 (Black)

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 2/27/2014 INST95-8901

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 95-8901

• Double DIN radio provision

• Painted to match the factory color and finish

• A) Radio Housing • B) Brackets • C) (5) #8 x 3/8” Phillips Screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-8901 Subaru harness 1990-up

Antenna Adapter: • 40-SB10 Subaru antenna adapter 2005-up

• Panel removal tool • Phillips screwdriver

• Socket Wrench

TOOLS REQUIRED

Subaru Legacy/Outback 2005-2009

For manual climate controls only, excluding Outback Sport.

95-8901

B C

Dash Disassembly

– Subaru Legacy/Outback 2005-2009 ..................... 2

Kit Assembly

– Double DIN radio provision ................................... 3

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8901 APPLICATIONS Table of Contents Subaru Legacy/Outback 2005-2009 For manual climate controls only, excluding Outback Sport. 95-8901 Dash Disassembly – Subaru Legacy/Outback 2005-2009..................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted to match the factory color and finish KIT COMPONENTS • A) Radio Housing • B) Brackets • C) (5) #8 x 3/8” Phillips Screws REV.
PAGE 2
95-8901 Dash Disassembly 1. Unclip and remove panel surrounding shifter including ashtray. (Figure A) 4. Remove (4) screws securing the climate control to the radio/climate control assembly then unclip and remove climate control. (Figure D) 2. Remove (1) Phillips screw per side panel then unclip and remove panels. (Figure B) 3. Remove (6) Phillips from radio to remove.
PAGE 3
95-8901 Kit Assembly 5. Slide the radio into the bracket/ radio housing trim panel assembly and secure to the assembly using the screws supplied with the radio. (Figure D) ISO DDIN radio provision 1. Clip the climate control into the back of the 95-8901. (Figure A) 2. Attach the hazard switch to the radio housing trim panel with the supplied (1) #8 x 3/8” Phillips screw supplied. (Figure A) 3. Attach the radio brackets to the radio housing trim panel using the (4) #8 x 3/8” Phillips screws supplied.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-8901 KNOWLEDGE IS POWER REV. 2/27/2014 INST95-8901 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8901 AplicAciones Indice Subaru Legacy/Outback 2005-2009 Únicamente para controles de clima manuales (Excluyendo Outback Sport) 95-8901 Desmontaje del tablero – Subaru Legacy/Outback 2005-2009..................... 2 Ensamble del kit – Provisión de radio doble DIN..................................
PAGE 6
95-8901 Desmontaje del tablero 1. Suelte y retire el panel que rodea la palanca de cambios incluyendo cenicero. (Figura A) 4. Remove (4) tornillos que aseguran el control de temperatura para el conjunto de control de radio/ clima entonces Soltar y retirar climatizador. (Figura D) 2. Retire (1) tornillo Phillips por panel lateral después Soltar y retirar los paneles. (Figura B) 3. Quitar (6) Phillips de la radio a quitar.
PAGE 7
95-8901 Ensamble del kit Provisiones de unidad central ISO DDIN 5. Deslice el radio dentro del ensamble del panel de la moldura de la carcasa del soporte/radio y sujételo al ensamble con los tornillos suministrados con el radio. (Figura D) 1. Clip del control climático en la parte posterior del 95-8901. (Figura A) 2. Conecte el interruptor de peligro para el panel de ajuste de vivienda por radio con los (1) # 8 x 3/8” Phillips suministrados tornillo suministrado. (Figura A) 3.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8901 EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 2/27/2014 INST99-8160G Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.