Quick Start Guide

1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and pull upwards on the gear
shifter boot just enough to allow the
gear shifter panel to be removed in the
following step. (Figure A)
2. Unclip the gear shifter panel from the
front, then slide forward to release
the hooks from the rear of the panel.
Unplug, and remove the panel.
(Figure B)
3. Open the ashtray, then unclip, unplug,
and remove the entire assembly.
(Figure C)
4. Remove (2) screws securing the hazard
& switch panel, then unclip, unplug, and
remove. (Figure D)
5. Unscrew clockwise, (2) screws
underneath the radio, just enough to
release it from the dash. Pull rearward
on the radio every couple of full turns
until the radio comes loose. Slide the
radio out, then unplug and remove.
(Figure E)
Continue to Kit Assembly
(Figure A)
(Figure B)
(Figure C)
(Figure E)
(Figure D)