User Manual

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certiﬁed technicians

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

95-8730B

If you are having difﬁculties with the installation

of this product, contact our Tech Support line

either by phone at 1-800-253-TECH, or email at

techsupport@metra-autosound.com. Before

doing so, look over the instruction booklet a

second time and ensure that the installation was

performed exactly as the instruction booklet

is stated. Have the vehicle apart and ready to

perform troubleshooting steps before contacting

Metra/Axxess Tech Support.

1. Slide the radio into the bracket/housing assembly, then secure the radio

using either the screws supplied with the radio, or the radio screws

provided. (Figure A)

2. Locate the factory wiring harness and antenna connector in the dash and

complete all necessary connections to the radio. Metra recommends using

the proper mating adapter from Metra and/or Axxess. Test the radio for

proper operation.

3. Slide the radio into the dash. Push the (2) T-20 Torx screws down, then

tighten them to secure the radio to the dash.

4. Reassemble the dash in reverse order of disassembly to complete the

installation.

KIT ASSEMBLY

(Figure A)