Quick Start Guide

REV. 3/1/2018 INST95-8727
3
KIT ASSEMBLY
1. Secure the radio brackets to the radio
using the screws provided with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connection in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio to the dash using the
(2) factory screws, to just the lower tabs
on the radio brackets . (Figure B)
4. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure A) (Figure B)