Quick Start Guide

1.800.221.0932
|
MetraOnline.com
2
1. Open the center console door, then
unclip the beauty trim from the front of
the center console compartment.
2. Unclip and remove the lower trim
from the front of the center console
compartment, then remove (2)
Torx T20 screws.
3. Turn the chrome trim from the bottom
of the shifter slightly counterclockwise,
then wiggle the shifter knob upwards to
remove it.
4. Unclip, unplug, and remove the beauty
trim surrounding the shifter.
5. Open the ashtray compartment door,
then remove (2) Torx T20 screws
securing the ashtray assembly.
DASH DISASSEMBLY
Please visit Metraonline.com for
Dash Disassembly illustrations.
6. Remove and unplug the ashtray
assembly, then remove (2) Torx T20
screws securing the center console
trim panel.
7. Pull the carpet back on the left and right
side of the front of the center console,
then remove just the (1) uppermost
Phillips screw from each side.
8. Unclip, unplug, and remove the entire
center console trim panel.
9. Remove (4) screws securing the radio
to the center console trim panel,
then remove.
Continue to Kit Assembly