User Manual

Kit Assembly 95-8226B
6
DDIN/stacked ISO DIN head unit provision
(Figure A)
(Figure B)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the Double DIN brackets to the
Double DIN housing. (Figure A)
3. Slide the Double DIN head unit or
stacked ISO head units into the bracket/
radio housing assembly and secure the
Double DIN head unit or stacked ISO
head units to the assembly using the
screws supplied with the radio.
(Figure B)
4. Snap the trim plate into the
radio housing.
5. Mount the radio housing/radio into the
dash, snap the radio housing trim panel
into position.
6. Reassemble dash in reverse order
of disassembly.