User Manual

ManualsBrandsMetra ManualsOtherMetra 95-8226B Dash Kit for Toyota Prius 2010 Double DIN (Black)

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932

metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 95-8226B

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness:

• 70-1761 Toyota harness 1987-up

• TYTO-01 Toyota premium sound interface 2003-up

Antenna Adapter:

• Not Required

Panel Removal Tool • Phillips Screwdriver • Socket Wrench

TOOLS REQUIRED

Toyota Prius 2010-up

95-8226B

B C DA

• A) DDIN Radio Housing • B) DDIN Brackets • C) Radio Housing Trim Panel • D) Trim Plate

KIT FEATURES

KIT COMPONENTS

• DDIN head unit provision

• Stacked ISO DIN head unit provision

• Painted scratch resistant Matte Black

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8226B APPLICATIONS Toyota Prius 2010-up 95-8226B KIT FEATURES • DDIN head unit provision • Stacked ISO DIN head unit provision • Painted scratch resistant Matte Black KIT COMPONENTS • A) DDIN Radio Housing • B) DDIN Brackets • C) Radio Housing Trim Panel • D) Trim Plate A B C D WIRING & ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: • 70-1761 Toyota harness 1987-up • TYTO-01 Toyota premium sound interface 2003-up Antenna Adapter: • Not Required TOOLS REQ
PAGE 2
95-8226B Table of Contents Dash Disassembly – Toyota Prius 2010-up 3 Kit Assembly – DDIN/stacked ISO head unit provision 4 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer also to the instructions included with the aftermarket radio.
PAGE 3
95-8226B Dash Disassembly 1. Unsnap and remove the shifter trim. (Figure A) 2. Unsnap and remove the console panel (extends from the pocket up the passenger side to the upper vents). (Figure B) 3. Unsnap the ignition button trim panel (not necessary to remove). (Figure C) 4. Unsnap and remove the radio/ climate trim panel. (Figure C) (Figure A) 5. Remove (4) 10 mm bolts to remove the radio.
PAGE 4
Kit Assembly 95-8226B DDIN/stacked ISO DIN head unit provision 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Attach the Double DIN brackets to the Double DIN housing. (Figure A) 3.
PAGE 5
Notes
PAGE 6
Notes
PAGE 7
Notes
PAGE 8
REV. 6/02/11 INSTALLATION INSTRUCTIONS FOR PART 95-8226B METRA. THE WORLD’S BEST KITS.™ metraonline.