User Manual

5
Kit Preparation
Kit Assembly 95-8214
H
M
PASSENGER
PASSENGER
INSERT CLOCK/HAZARD SWITCH ASSEMBLY
FROM REAR OF 99-8214 RADIO HOUSING TRIM
P
ANEL
H
M
PASSENGER
PASSENGER
(Figura A)
(Figura B)
1. Attach the clock/hazard switch bracket
to the radio housing using the (4) #6 x
3/8” Phillips pan head screws.
(Figura A)
WARNING: DO NOT
OVERTIGHTEN SCREWS.
2. Clip the clock/hazard switch assembly
into the 95-8214 radio housing trim
panel. (Figura B)
3. Install the four included panel clips to
the back of the Radio Housing Trim
Panel (factory clips can also be used
if desired).
Continued on next page