Owner's Manual

REV. 8/31/2017 INST95-8202

KIT ASSEMBLY

ISO DDIN radio provision

1. If applicable, remove the trim ring from the aftermarket radio.

2. Attach the factory mounting brackets and the

ISO DDIN trim

plate brackets

to the radio with the screws supplied with the

radio.

Note:

Remove locating pins from factory brackets using a

grinder tool.

3. Locate the factory wiring harness in the dash. Metra

recommends using the proper mating adapter from Metra or

AXXESS. Test the radio for proper operation.

4. Reassemble the dash in reverse order of disassembly.

Style of factory brackets

may differ