Quick Start Guide

1.800.221.0932
|
MetraOnline.com
6
KIT ASSEMBLY
(CONT.)
3. Clip the information display to the
assembly, then secure using the factory
screws. (Figures E, F)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
5. Secure the entire assembly to the dash
using the factory screws.
6. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure E) (Figure F)