User Manual

95-8155 KIT ASSEMBLY
2
Assemble the climate controls and
Double DIN or stacked ISO mount
units into the factory brackets using
the hardware from disassembly and
the screws supplied with the after-
market unit(s). (Figure A)
1
Before tightening the front (2) mount-
ing screws (closest to the radio’s
face) to the unit(s) attach the Double
DIN Radio Housing then tighten the
screws. (Figure B)
2
Continue to final assembly.
A
TWO ON EACH SIDE
B
TWO FRONT SCREWS
ON EACH SIDE
LEXUS ES SERIES 1997-2001
DOUBLE DIN RADIO
STACKED ISO MOUNT UNITS PROVISON
Note: Refer also to the instructions included with the aftermarket radio.