User Manual

Kit Assembly 95-7867

(Figure C)

1. Mount the hazard switch to the back of the radio

housing using the factory hardware (removed previously

in the dash disassembly). (Figure A)

2. Mount the bracket assembly (removed previously in the

dash disassembly) to the back of the housing using the

factory hardware. (Figure B)

3. Slide the radio into the bracket/radio housing assembly

and secure to the assembly using the screws supplied

with the radio. (Figure C)

4. Locate the factory wiring harness and antenna plug in

the dash. Metra recommends using the proper mating

adapters from Metra and/or AXXESS.

5. Mount the new radio assembly into the dash and

reassemble dash in reverse order of disassembly.

Double DIN radio provision

(Figure A)

6. Remove (2) Phillips screws securing

the hazard switch to the back of the

radio trim panel and remove the switch.

(Retain the switch and screws to be

reinstalled into the double DIN trim plate

during kit assembly.) (“D”, Figure C)

Continue to kit assembly

Acura RSX

2002-2006

(Figure C)

(Figure B)

“D”