User Manual

2
Dash Disassembly
– Acura RSX 2002-2006 ..................................2
Kit Assembly
– Double DIN radio provision ............................3
Table of Contents
1. Unclip the power outlet panel and remove (2) Phillips
screws exposed facing up. (“A”, Figure A)
2.
Unclip the radio trim panel assembly (including the
radio and the hazard switch) then unplug and remove
the assembly. (Figure A)
3.
Remove (4) Phillips screws securing the factory radio
to the bracket assembly and remove the unit.
(“B”, Figure A)
4.
If a factory pocket is present, remove (4) Phillips
screws securing the pocket to the bracket assembly
and remove.
5.
Remove (4) Phillips screws securing the bracket
assembly to the back of the radio trim bezel and
remove the bezel. (Retain the bracket assembly and
screws to be reinstalled into the radio housing during
kit assembly. Screws have been provided in the event
the factory screws are not present.) (“C”, Figure B)
95-7867
Acura RSX 2002-2006
Dash Disassembly 95-7867
(Figure A) (Figure B)
“B”
“B”
“A”
“A”
“B”
“B”
“C”
“C”
“C”
“C”