User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-7867Double DIN Installation Kit for 2002-2006 Acura RSX Vehicles

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 10/9/2014 INST95-7867

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation instructions for 95-7867

• A) Radio housing • B) (4) Truss head screws

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-1721

• 70-1725

Antenna Adapter:

• Not required

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

• Double DIN radio provision

KIT FEATURES

Acura RSX 2002-2006

95-7867

Summary of content (4 pages)

PAGE 1
Installation instructions for 95-7867 Acura RSX 2002-2006 95-7867 KIT FEATURES • Double DIN radio provision WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-1721 • 70-1725 Antenna Adapter: • Not required TOOLS REQUIRED • Panel removal tool • Phillips screwdriver REV. 10/9/2014 INST95-7867 KIT COMPONENTS • A) Radio housing • B) (4) Truss head screws A B CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation.
PAGE 2
95-7867 Dash Disassembly 95-7867 Table of Contents Acura RSX 2002-2006 Dash Disassembly – Acura RSX 2002-2006...................................2 Kit Assembly – Double DIN radio provision.............................3 1. Unclip the power outlet panel and remove (2) Phillips screws exposed facing up. (“A”, Figure A) 2. Unclip the radio trim panel assembly (including the radio and the hazard switch) then unplug and remove the assembly. (Figure A) 3.
PAGE 3
Kit Assembly 95-7867 Double DIN radio provision Acura RSX 2002-2006 6. Remove (2) Phillips screws securing the hazard switch to the back of the radio trim panel and remove the switch. (Retain the switch and screws to be reinstalled into the double DIN trim plate during kit assembly.) (“D”, Figure C) Continue to kit assembly 1. Mount the hazard switch to the back of the radio housing using the factory hardware (removed previously in the dash disassembly). (Figure A) 2.
PAGE 4
Installation instructions for 95-7867 KNOWLEDGE IS POWER REV. 10/9/2014 INST95-7867 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.