Installation Guide
REV. 3/9/2018 INST95-7805CH
3
4. Unclip and remove the coin holder from
the 12 volt socket/coin holder assembly.
(Figure E)
5. Remove (1) Phillips screw under coin
holder then unclip and remove 12 volt
socket/coin holder assembly. (Figure F)
6. Remove (4) Phillips screws securing
the pocket assembly then unclip and
remove the pocket. (Figure G)
Continued on next page
DASH DISASSEMBLY (CONT.)
(Figure F)
(Figure E) (Figure G)










