Quick Start Guide

REV. 6/3/2019 INST95-7637
5
KIT ASSEMBLY
Pioneer Modular DDIN radio provision
Note: For steps 4 and 5, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1. Attach (3) panel clips provided onto the
radio housing (front). (Figure A)
2. Snap the radio housing (front) to the
radio housing (rear), then secure using
(4) #4 x 3/8” Phillips screws provided
(Figure B)
(Figure C)(Figure A)
(Figure D)(Figure B)
3. Secure the radio brackets to the radio
housing using (4) #6 x 3/8” Phillips
screws provided. (Figure C)
4. Secure the radio display to the Pioneer
adapter brackets using (6) screws
supplied with the radio. (Figure D)
Continued on the next page