User Manual

REV. 10/26/2017 INST95-7319
3
(Figure A) (Figure B) (Figure C)
KIT ASSEMBLY
ISO DDIN radio provision
1. Attach the corresponding a/c control
brackets to the factory a/c control using
the factory hardware. (Figure A)
Note: The radio housing must be
installed first before the a/c control.
2. Secure the radio brackets to the radio
with screws supplied with the radio.
(Figure B)
3. Slide the radio into the radio opening of
the sub-dash.
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for proper
operation.
5. Secure the radio housing onto the
completed assembly using the factory
screws. (Figure C)
6. Reassemble the dash in reverse order of
disassembly.