User Manual

1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove panel surrounding
shifter including cup holders. (Figure A)
2. Remove (2) Phillips screws at base
of panel surrounding radio and a/c
controls. (Figure B)
3. Unclip and remove panel surrounding
radio and a/c control. (Figure C)
4. Remove (6) Phillips screws securing
radio and a/c control. (Figure D)
5. Remove (4) Phillips screws securing
factory a/c control to bracket assembly.
(Figure E)
Continue to Kit Assembly
P
R
N
D
VOL
LOAD
ESP
2 Phillips screws on each side
(Figure B)
(Figure D)
(Figure A) (Figure C) (Figure E)
DASH DISASSEMBLY