User Manual

1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the radio trim panel.
(Figure A)
2. Remove (4) Phillips screws securing the
radio, then unplug and remove the radio .
Continue to Kit Preparation
1. Carefully grind or cut away the (4) plastic
welded tabs securing the a/c vents to the
radio trim panel, then remove the vents.
(Figure A)
2. Trim the top of the a/c vents. (Figure B)
3. Attach the a/c vents to the radio trim
panel, then secure them by either gluing
them, or plastic welding them in place.
Note: Once the radio trim panel is
secured to the vehicle, this will also hold
the vents in place.
4. Attach the (2) panel clips provided onto
the radio trim panel .
5. Cut the sub-dash to allow room for the
radio assembly. (Figure C)
Continue to Kit Assembly
(Figure A)
DASH DISASSEMBLY KIT PREPARATION
(Figure A)
(Figure B)
(Figure C)
Remove shaded area