Owner's Manual

Installation Kit

120 92-3300P

Chevrolet

Spacers

(supplied with

your order)

1. Press posts on trimplate into holes on kit frame to

snap parts together and secure with hex screws

(Figure 1).

2. Push clips on support tray into slots on rear of kit frame

to secure (Figure 1).

3. Secure side mounting brackets to kit assembly with

studs and nuts supplied (Figure 1).

4. Choose the proper spacers (supplied with your order) to

allow receiver nosepiece to extend 1/8” to 1/4” beyond

face of trimplate (Figure 2).

5. Insert receiver shafts (with spacers in place) through

openings in trimplate. Secure receiver and faceplate

with shaftnuts supplied with receiver.

6. Attach control knobs.

1/8” -1/4”

▲

Spacer

Shaft Receiver Assembly

FIGURE 2

Shaftnuts

FIGURE 1

Trimplate

Kit Frame

Support Tray

Mounting Bracket

Faceplate

Control Knobs

Tools Required

▲

Deep Socket

(size depends upon receiver)

Stud

Nut

1/4” & 3/8”

Sockets

Hex Screws