Owner's Manual

Black - Negative

White - Positive

*12071051*

Speaker Wiring Adaptor

120 71-051

Revision 06/17/02

STEP 1 -- CONNECT WIRES

STEP 2 -- INSTALL

Plug housings into factory

harnesses in vehicle.

Connect wires to speakers as

shown (see inset). Make sure

polarity is correct.

Alternate Connection Method

Strip wires back 1/2”

Twist Together

Tape

Solder:

1. Heat wire.

2. Touch solder to wire, not to iron.

Connect to Vehicle Harness

Connect to Speakers

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials. If an item

is missing, please call:

Crutchfield at 1-888-955-6000

1-800-955-9094

Technical Service

Tools Required

Electrical

Tape

INSET

Soldering

Iron

Solder

(Rosin Core

Suggested)

▲