Owner's Manual

120 71-Q32
Speaker Wiring Adaptors
Revision 08/08/94
12071032
Attach to speakers (Fig. 1 ).
Black- negative(-)
vehicle speaker plugs
Note: If slip-on connectors do not fit your speakers (Fig . 1 ), cut them
off and solder (or splice) to the harness supplied with speakers (Fig. 2).
Alternate Connection Method:
Isolate and individually tape o ff the
ends
of any unused wires to prevent
electrical stwrt circuit.
How to connect wires:
/ • Strip wire ends back 1/2"
/ • Twist together
• Solder
•Tape
Tools required:
soldering iron
solder
(Rosin Core suggested.)
CRUTCHFIELD electricaltape
Copyright 1994 Crutc hfi e ld Corporation