Owner's Manual

120 71-Q17
Speaker Wiring Adaptors
Revision 07/22/94
12071
Attach to speakers (Fig. 1 ).
White- positive(+)
To vehicle speaker plugs
To your speakers
Note: If slip-on connectors do not fit your speakers (Fig. 1 ), cut them
off and solder (or splice) to the harness supplied with speakers (Fig. 2).
Alternate Connection Method:
factory side
How to connect wires:
~ • Strip wire ends back 1/2"
;:::" ~ / •Twist together
isolate and i nd ividually tape off the
ends of any unused wires to prevent
electrical stwrt circuit.
• Solder
•Tape
Tools required:
soldering iron
solder
(Rosin Core suggested.)
CRUTCHFIELD electricaltape
Copyright 1994 Cru tchfield Corporation