Owner's Manual

120 71-003
Speaker Wiring Adaptors
Revision 06/23/94
Attach to speakers (Fig. 1 ).
Black- negative(-)
White- positive(+)
To your speakers
To vehicle speaker plugs
Note: If slip-on connectors do not fit your speakers (Fig. 1 ), cut them
off and solder (or splice) to the harness supplied with speakers (Fig. 2).
Alternate Connection Method:
Isolate and individuatty tape off the
ends
of any unused wires to prevent
electrical short circuit
How to connect wires:
~ • Strip wire ends back 1/2"
~ ~ / •Twisttogether
• Solder
•Tape
Tools required:
soldering iron
solder
(Rosin Core suggested.)
CRUTCHFIELD electricaltape
Copyright 1994 Crutchfield Corporation
slip-on connectors