Owner's Manual

ManualsBrandsMetra ManualsAudio accessories & installation108-TO1HG

Table Of Contents

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

108-TO1

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

Patent Pending

KIT FEATURES

• Designed speciﬁcally for the Pioneer DMH-C5500NEX 8-inch radio

• 108-TO1B - Painted scratch resistant matte black

• 108-TO1HG - Painted high gloss black

• 108-TO1CHG -Painted high gloss charcoal (matches 2010-up)

KIT COMPONENTS

• A) Radio housing • B) Radio brackets

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 10mm socket wrench

TABLE OF CONTENTS

Dash Disassembly

-With console shifter ..........................................2-3

-With column shifter .........................................4-5

Kit Assembly ..........................................................6

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: Please visit metraonline.com

for wiring harness options

Antenna Adapter: Please visit metraonline.com

for antenna adapter options

A B

Toyota Sequoia 2008-up, Tundra 2007-2013

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

Summary of content (9 pages)

PAGE 1
08-TO1 I N S TA L L AT I O N I N S T R U C T I O N S Patent Pending Toyota Sequoia 2008-up, Tundra 2007-2013 Visit MetraOnline.
PAGE 2
DASH DISASSEMBLY With console shifter 1. Unclip and remove the trim panel around the cup holders. (Figure A) 2. Remove (1) Phillips screw securing the shifter trim panel, then unclip and remove the panel. (Figure B) 3. Unclip, unplug and remove the climate control assembly. (Figure C) Continued on the next page 2 (Figure A) (Figure B) (Figure C) 1.800.221.0932 | MetraOnline.
PAGE 3
DASH DISASSEMBLY (CONT.) 4. Remove (4) 10mm screws securing the bottom of the radio. (Figure D) 5. Unclip the right side of the instrument panel trim to allow room for the radio to be removed in the following step. 6. Unclip the radio from the dash. Slide the radio out, then unplug and remove radio. (Figure E) Continue to Kit Assembly (Figure D) (Figure E) REV.
PAGE 4
DASH DISASSEMBLY With column shifter 1. Remove (2) plastic Phillips screws from each side of the trim panel below the cup holder, then unclip and remove the panel. (Figure A) 2. Pull the cup-holder out, then depress the clip from each side to remove the cup-holder from the dash. (Figure B) 3. Remove (4) Phillips screws securing the cup-holder assembly to the dash, then unclip and remove the assembly. (Figure C) (Figure A) (Figure B) (Figure C) Continued on the next page 4 1.800.221.
PAGE 5
DASH DISASSEMBLY (CONT.) 4. Unclip the climate control assembly and set aside. (Figure D) 5. Remove (4) 10mm bolts securing the bottom of the radio. (Figure E) 6. Unclip the right side of the instrument panel trim to allow room for the radio to be removed in the following step. 7. Unclip the radio from the dash. Slide the radio out, then unplug and remove radio. (Figure F) (Figure D) (Figure E) (Figure F) REV.
PAGE 6
KIT ASSEMBLY Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 1. Secure the radio brackets to the radio chassis using (4) screws supplied with the radio. (Figure A) 2. Secure the radio display to the radio brackets using (4) screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash.
PAGE 7
REV.
PAGE 8
108-TO1 I N S TA L L AT I O N I N S T R U C T I O N S If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 1-800-253-TECH, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.
PAGE 9
108-TO1 Toyota Sequoia 2008-up Toyota Tundra 2007-2013 Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications.