Installation Guide

1.800.221.0932
|
MetraOnline.com
2
1. Unsnap the climate control/wiper control
trim panel and remove. (Figure A)
2. Unsnap the headlight switch trim panel
and remove. (Figure B)
3. Remove (10) Phillips screws from the
top and bottom of the radio/instrument
cluster trim bezel. Pry out on the bottom
edge of the bezel and remove. (Figure C)
4. Remove (2) 3/8” hexhead screws
securing the factory radio and
disconnect the wiring.
Continue to Kit Preparation
DASH DISASSEMBLY
(Figure A) (Figure B) (Figure C)