Instruction Manual

8
(Figure 3)
QUICK SETUP GUIDE (CONT.)
DSP Setup & Controls (Cont’d)
Next Select the OUTPUTS tab – This screen is where you setup your speaker’s
output channels. Under the GROUP menu, select the first drop down arrow
to the right of the word NONE. Select the name from the dropdown menu
that matches the location listed on the far left of the screen.
Example: #1 – Location - Left Front, under the Groups dropdown menu
select Left Front. (Figure 3)
• Location - Location of speaker.
• Group - Used to join channels together for simple equalization.
Example: left front woofer/midrange and left front tweeter will be
considered simply left front. The letter M denotes the speaker assigned
as the master speaker.
• Invert - Will invert the phase of the speaker.
• Mute - Will mute desired channel(s) for tuning individual channels.
Continued on the next page