Instruction Manual

2
PREFACE
The MPS-DSPX-RC1 is designed specially for the Polaris Ride Command system. The input of the DSPX harness is prewired to plug directly into the Amp 1, Amp 2, and Amp 3 harnesses behind the RC
screen. The MPS-DSPX-RC1 offers a Differential Balanced input as well as independent level control on the outputs of each channel. Independent volume control is important for the AMP 3 factory plug.
AMP 3’s output is not adjustable through the ride command screen. The AX-DSP-XL app offers the ability to control the output level of your subwoofer. The kit also includes a remote mounted bassknob
that offers additional output control for your aftermarket subs. Another common problem with adding aftermarket amps to the RC system is “turn on pops”. Through the APP you can delay the remote
output turn on up to 10 seconds eliminating the turn on/off pops you can get with the other products.
To complete your new system we recommend our MPS-RZKIT.
The MPS-RZKIT is a 10” Subwoofer and Speaker Pod combo kit with amplifier mount brackets included.
The MPS-RZKIT fits 2014-Up Polaris RZR models.