Instruction Manual

Inputs/Levels

• Clipping Level - Use this feature to protect sensitive speakers like

tweeters from being driven past their capabilities. If the output signal

of the DSP clips the audio will be reduced by 20dB. Turning down

the stereo will allow the audio to come back at a normal level. The

sensitivity of this feature can be adjusted to the listening preference

of the user.

• Chime Volume - Not applicable in this application.

• Amp Turn On

• Signal Sense - Will turn the ampliﬁer on when an audio signal

is detected, and keep on for 10 seconds past the last signal. This

ensures the ampliﬁer doesn’t shut off between tracks.

• Always On - Will keep the ampliﬁers on as long as they is cycled on.

• Turn on Delay - Can be used to delay amp turn-on to avoid

turn-on pops.

• Subwoofer Input - For selecting either a dedicated subwoofer input

or summed from the front and rear inputs.

Continued on the next page

ADVANCED DSP FEATURES & CONTROL OPTIONS (CONT.)