Instruction Manual

11
REV. 3/5/2021 INSTMPS-DSPX-RC1
Continued on the next page
QUICK SETUP GUIDE (CONT.)
DSP Setup & Controls (Cont’d)
(Figure 6)
DSP Setup & Controls (Cont’d)
The final step to getting your MPS-DSPX-RC1 setup is to save all your settings to the DSP.
To do this select your CONFIGURATIONS tab and select LOCK DOWN. This will write all your
setting to the DSP and save them.
Note: If you turn the ignition off or close the app before LOCKING DOWN all your
information will be lost and you will need to go through the setup steps again. (Figure 6)