Car Stereo System User Manual

ManualsBrandsMetra Electronics ManualsCar Stereo System99-7610B

INSTALLATION INSTRUCTIONS FOR PART 99-7610

99-7610B

99-7610HG

2007-up

Nissan Versa

2011 Nissan Juke

KIT FEATURES

• DIN head unit provisions with pocket

• ISO DIN head unit provision with pocket

• Double DIN mount radio provision

• B = Matte Black

• HG = Gloss Black

• 70-7552 - 2007-up Nissan Harness

• 40-NI12 - 2007-up Nissan Antenna Adapter

KIT COMPONENTS

WIRING AND ANTENNA CONNECTIONS

(Sold Separately)

TOOLS REQUIRED:

Panel Removal Tool • Phillips Screwdriver

Socket Wrench

1-800-221-0932

metraonline.com

A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate

METRA. THE WORLD’S BEST KITS.

™

APPLICATIONS

INSTALLATION INSTRUCTIONS FOR PART 99-7610

Summary of content (12 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7610 INSTALLATION INSTRUCTIONS FOR PART 99-7610 APPLICATIONS 2007-up Nissan Versa 2011 Nissan Juke 99-7610B 99-7610HG KIT FEATURES • DIN head unit provisions with pocket • ISO DIN head unit provision with pocket • Double DIN mount radio provision • B = Matte Black • HG = Gloss Black KIT COMPONENTS A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate WIRING AND ANTENNA CONNECTIONS (Sold Separately) A • 70-7552 - 2007-up Nissan Harness • 40-NI12
PAGE 2
INSTALLATION INSTRUCTIONS FOR PART 99-7610 TABLE OF CONTENTS Dash Disassembly - Nissan Versa 2007-up..............................................................................1 - Nissan Juke 2011....................................................................................2 Kit Assembly - DIN Mount Radio Provision with Pocket .................................................. 3 - ISO Mount Radio Provision with Pocket ...............................................
PAGE 3
99-7610 DASH DISASSEMBLY 2007-UP NISSAN VERSA 1. Unclip and remove the panel above the radio. (Figure A, B) 2. Remove (2) Phillips screws securing the radio trim panel then unclip and remove the entire panel surrounding the radio and a/c controls. (Figure C) 3. Remove (4) Phillips screws securing radio, unplug and remove radio. (Figure D) Continue to kit assembly.
PAGE 4
99-7610 DASH DISASSEMBLY 2011 NISSAN JUKE 1. Unclip and remove the climate control panel. (Figure A) 2. Remove (2) Phillips screws securing the radio trim panel. (Figure B) 3. Remove (4) Phillips screws securing radio, unplug and remove radio. (Figure C) Continue to kit assembly.
PAGE 5
99-7610 DIN HEAD UNIT PROVISION Note: You will need to remove the aftermarket radio’s trim ring if equipped. Nissan Juke 1. Cut and remove the appropriate tabs not necessary for your application. (Figure A) Nissan Versa 2. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B) Nissan Juke 3. Slide the aftermarket head unit into the cage and secure. (Figure C) Figure A 4. Locate the factory wiring harness and antenna plug in the dash.
PAGE 6
99-7610 ISO MOUNT RADIO PROVISION Note: The following modification will need to be made to both ISO brackets when using the ISO mount radio provision. Cut or trim the area shown from the ISO bracket. (Figure A) 1. Cut and remove the appropriate tabs not necessary for your application. (Figure B) Continued on page 5.
PAGE 7
99-7610 1. Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure C) 2. Slide the head unit into the radio opening until the side clips engage. (Figure D) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Attach the trim plate supplied with the kit to the front of the radio housing assembly. (Figure D) Figure C 5. Reassemble dash in reverse order of disassembly.
PAGE 8
99-7610 DOUBLE DIN MOUNT RADIO PROVISION 1. Mount the factory brackets (removed from factory radio during disassembly) to the sides of the double DIN radio using screws supplied with the double DIN radio. (Figure A) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Place the DDIN trim plate on the front of the DDIN radio. (Figure B) Figure A 4. Reassemble dash in reverse order of disassembly.
PAGE 9
9-7610 NOTES
PAGE 10
99-7610 NOTES
PAGE 11
99-7610 NOTES
PAGE 12
REV. 7/26/11 INSTALLATION INSTRUCTIONS FOR PART 99-7610 METRA. THE WORLD’S BEST KITS.™ 1-800-221-0932 metraonline.