Automobile Accessories User Manual

Kit Assembly 99-7509
6
DIN radio provision with pocket
(Figure A)
(Figure B)
(Figure C)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure A)
3. Slide the aftermarket radio into the cage
until it snaps into place. (Figure B)
4. Snap the pocket into the radio housing.
(Figure C)
5. Reassemble dash in reverse order
of disassembly.