Car Stereo System User Manual

4
ISO DIN HEAD UNIT PROVISION
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Fig. A)
Slide the head unit into the radio
opening until the side clips engage.
(Fig. B)
Snap the Trim plate into the Radio
Housing. (Fig. B)
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
Reassemble dash in reverse order
of disassembly.
1
2
3
A
B
4
5
99-7340B KIT ASSEMBLY