Technical data

8.5.2008 Rev. 2.2

Installation

5.2.5 Height setting model MT200V

The MT200V model is in height adjustable. Follow the steps below to optimally set the

appliance to the height of the thermos flask being used.

• Slide the basket filter (1) into the appliance.

• Grasp the top part of the appliance and turn the adjustment button (2) a half-turn

anti clockwise.

• Lift the top part of the appliance upwards.

• Place the thermos jug you intend to use at the base of the appliance.

• Now slowly allow the top section to go down until the marking line (3) on the col-

umn is level with the top side of the thermos jug. (This column height adjustment

must be done with the top open if the appliance is used in combination with a ther-

mos jug with a pump).

• Tighten the adjustment button (clockwise).

• After repositioning, check if the thermos jug properly presses in the jug detector

handle (4) (the green indicator light (5.3) must not blink when a coffee making

process begins).