Technical data

8.5.2008 Rev. 2.2

Installation

5. Installation

5.1 General

5.1.1 Unpacking

The machine has been carefully packed to prevent damage being caused to your new cof-

fee maker. Remove the packing carefully without using sharp objects. Check if the appli-

ance is complete. The appliance is delivered with the following accessories:

Please contact your dealer if any parts are missing or damaged.

5.2 Installation

5.2.1 Preparation for positioning the appliance

Water always remains in the heating system: for this reason the appliance must not be

placed in an area where the temperature can fall below freezing point.

• Position the appliance at buffet height on a firm, level base that can bear the weight

of the appliance when it is filled.

• Position the appliance level and in such a way that it cannot cause any damage if

it leaks.

• The water supply pipe (G3/4” pipe 15 mm) and the power connection must be lo-

cated within a half metre of the appliance.

• The owner must have these installation-technical preparations performed by qual-

ified engineers in accordance with general and local regulations.

• The service engineer may only connect the appliance to the prepared connections.

M 200 M 202 MT 200 MT 200V

Glass jug 2 4 - -

Basket filter 1 2 1 1

Filter paper (25 pcs.) 1 1 1 1

Coffee measuring cup 1 1 1 1

Water measuring cup - - 1 1

Funnel 1 1 1 1

Water connection hose 1 1 1 1

Manual 1 1 1 1