Technical data

8.5.2008 Rev. 2.2
Operation instructions
13
4.2.3 Settings
The jug will overflow if the set coffee quantity is too high.
The manufacturer is unable to accept any liability for the consequences of altered settings.
Setting of the amount of coffee
Both the M and the MT models are supplied as standard set to make coffee using 1,8 litres
of water (14 cups). If this is too much or too little, or if you are using an MT model in
combination with a thermos jug with a greater capacity, you can adjust the quantity as fol-
lows:
• Press the selection button (5.4) and hold it in, and then press the start/stop button
(5.5) once. A number will appear in the display.
• Release both buttons. The display will show the set value. The standard setting is
20 (1.8 l. / 14 cups).
• Press the selection button (5.4) to increase the amount. Each increase in the display
puts approximately 4 ml more water in the jug. Use the table beside. To reduce the
quantity: go through the table until it restarts after 50. The range runs from
0,1,2,3,4 ..... 50.
• Now wait for 6 seconds. The selected quantity is now saved.